上 海 瑞 獅 生 物 科 技 有 限 公 司
Shanghai RuiShi Biological Technology Co.Ltd
快速查找:
手功能
矯形鞋墊
導航菜單
聯系我們
公司名稱:
上海瑞獅生物科技有限公司
公司地址:
上海市虹口區中山北一路1250號滬辦大廈2號樓1409A
聯系人:劉德明
手機:
18939806773
傳真:
021-65106616
郵箱:
sales@ruishihealthcare.com


 
 

 





 
OptoGait步態分析訓練系統模塊化系統(5米及5米以上套裝)

Optogait是對于正?;蛱幱诓±砬闆r下的測試者的動作分析和功能評估的一套創新的系統。OptoGait步態分析訓練系統具有攜帶方便,快速易用和性價比更高等特點,是目前在競技體育、足部醫療、矯形、康復等領域使用廣泛的評估工具。
OptoGait 步態分析訓練系統由發射端和接收端組成,兩者之間存在無形的LED紅外光束,LED燈的間隔為1厘米。系統配備的光學傳感器的頻率是1000赫茲,當腳置于發射端和接收端之間時,就會阻斷光束傳輸,設備會立即捕捉到并獲得相關數據,在執行跑步,步態或者各種跳躍測試的時候,騰空時間和觸地時間將以千分之一秒的精度被測出,長度精度為1厘米。這些測量出來的客觀數據和被捕獲的視頻在一起可以分析測試者的步態情況,檢測出有問題的部位,分析出效率低下和兩條腿不對稱等問題。Optogait 系統實時地獲得步態、跑步機跳躍測試的數字參數,并且可以直觀地看到這些數據。系統會在幾秒鐘之內生成一個便于查看的報告,包含了所有的主要數據,左右腳的不平衡性也即刻顯示出來。OptoGait軟件可以很容易的存儲所有執行的測試并且可以隨時重新查看,這很有助于開發測試者的特殊康復計劃。也可以很方便的對比不同時期的測試結果,用來確定康復方法的有效性和效率。
OptoGait步態分析訓練系統由于沒有機械運動部件和物力接觸,確保了系統沒有物力損耗也就保證了足夠長的使用壽命、精確度和重復使用的可能性。
 
Optogait可以做到:
  • 客觀的評價測試者的身體條件
  •  通過數據和視頻資料發現測試者的不足、身體姿勢的問題和不對稱性,并且可以看出測試者的治療效果
  • 通過精確的數據促進康復訓練方案的開發
  • 由于實時的數據分析報告,可以防止由于錯誤的評估和診斷而造成的并發癥、復發癥和術后的病理退化
  • 可以定期的檢查治療的效果
  • 給測試者提供康復進步了的證據,讓他們增添信心
  • 比較術前術后,或者新的訓練方案前后的變化
  • 在動態測試情況下檢查足弓墊、鞋墊和功能繃帶的使用帶來的效果
  • 比較不同的鞋子對于測試者步態的影響

數量和質量評定:
OptoGait在行走,跑步和跳躍測試中獲得的實時參數, 可以立即查看。所有數值都可輕松讀取,兩腿的不對稱信息會立即突出顯示。 OptoGait不僅可以檢測數據,而且能通過可自由定位的小型攝像機讓用戶獲取和檢測數據完美同步的圖像。不需要任何進一步的硬件和相機之間的同步,交叉驗證數據和圖像的許多好處可以充分得到利用。更進一步的視頻分析可以通過軟件中更專業的工具(角度、距離的計算、圖形工具,等等)實現。

OptoGait模塊化系統可以幫您實現:
  • 行走步態訓練??梢宰龊唵蔚木毩?從A點走到B點),也可以是復雜的練習,如“往返走”或倒退走。還可以有更復雜的,如有必要,可添加障礙物(如塑料錐)或在步態訓練各階段穿插各種動作(例如在往回走之前坐下然后站起)或兩樣同時進行。雙重任務和穿越障礙行走仍可以輕易地進行測量。
  • 跑步測試與步態測試類似,可以以一個靜態的方式開始,也可以以跑步狀態開始,來分析階段動作。如田徑訓練中分析測試者在每個來回疲憊感增加前后的動作變化,測量方向改變后的時間及加速度等……
  • 五米或五米以上更大的設施:患者可以在幾乎任何地面上步行或跑步。同樣的,所有步態的相關參數很容易測量。不同的是左右方向可以被記錄??梢詼y量每條腿的速度和加速度。各個方向的動作都可以被對稱分析。測試長度靈活可調。 系統寬度可達6碼。這使得臨床醫生可制定各種“障礙訓練課程”來分析患者的步態。
每米系統用連接盒連接,實用而且具有創新意義,使得模塊化系統可以在幾分鐘內快速安裝完成,無需線纜連接或者其他的網絡適配器。模塊化系統的長度最小2米,最大100米。
OptoGait 步態分析訓練系統模塊化系統是一個新型運動分析系統和在正?;虿±項l件下的患者功能專業評估工具,攜帶方便,快速易用,性價比高。
 
OptoGait步態分析訓練系統模塊化系統(5米及5米以上套裝),5米版包括:
OptoGait 發射器帶集成接口 (1cm)1個
OptoGait 接收器帶集成接口 (1cm)1個
OptoGait 發射器 (1cm)4個
OptoGait 接收器 (1cm)4個
OptoGait連接插頭8個
USB 電纜 A+B 1根
Optojump Next / OptoGait 5米版手提箱1個
電源2個
歐盟標準的充電插頭2個
Optojump Next / OptoGait網絡攝像頭2個
三腳架2個
USB延長裝置2個
Optogait 電圖儀外部電纜1條
OptoGait 軟件1個

意大利制造

LM7184 OptoGait電子步態分析訓練儀(5米版) 電郵詢價
 





 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
OptoGait (5 Metre Kit) OptoGait is portable, quick, easy to use and very competitively priced compared to other Gait Analysis systems on the market today. OptoGait (in partnership with Podotech) is an innovative system for movement analysis and functional assessment of patients with normal or pathological conditions. This system comes with an extensive kit, that includes: 1 OptoGait TX with integrated interface (1cm) 1 OptoGait RX with integrated interface (1cm) 4 OptoGait TX (1cm) 4 OptoGait RX (1cm) 8 Connection plug for OptoGait 1 USB Cable A+B 1 Carrying Case for Optojump Next / OptoGait 5 meters 2 Power supply OptoGait up to 5m 2 EU plug for battery charger 2 Webcam for Optojump Next / OptoGait 2 Tripod 2 USB extension 1 Optogait Surface EMG cable 1 OptoGait Software The OptoGait modular system allows you to carry out: Gait Tests can consist of simple exercises (moving from A to B), but also of more complex ones, such as ‘roundtrip’ or walking backwards. They can be more complex, if needed, adding obstacles (e.g. plastic cones) or actions to be carried out between the various gait phases (sitting down and getting up before coming back, for example) or simultaneously. Dual task and obstructive task walking, can be easily measured here. Running Tests, just like gait tests, can be carried out either starting from a stand or running, to analyze the various phases, how the incremental weariness acts on the patient at each round installing the system on a track, measuring the time of a change of direction and the following acceleration, and so on... Thanks to the practical and innovative assembling system using caps, the modular system is assembled in a few minutes and does not require cables to connect the bars or further net adapters. The length goes from a minimum of 2 meters to a maximum of more than 100 meters. Larger installations of five meter or plus: allows the patient to walk or run through the machine on nearly any surface. Again, all parameters of gait are easily measured. Differentials, left and right, are noted. Speed and acceleration of each leg can be measured. Every motion in all directions can be analyzed for symmetry. The length of the system is flexible. The width of the system can be a maximum of six yards. This affords the clinician the ability to lay out various ‘obstacle courses’ to analyse their patient’s gait. Optogait allows users to: Assess objectively the patient’s general physical conditions Identify deficiencies, postural problems and asymmetries on the basis of data and videos and determine how the patients’ performance is being effected. Develop and apply therapeutic-rehabilitation applications, rehab approaches and orthopaedic solutions on the basis of precise data Prevent - thanks to immediate assessment of numerical values - of relapses, complications and involutions of the pathological or post-accident condition due to wrong evaluations or diagnosis Periodically verify the results and the efficacy of treatment Motivate patients giving them tangible proof of improvement Compare post- and pre-accident values if available Verify, in a dynamic situation, the efficacy of arch supports, insoles or functional tapes. Compare various shoes and their effect on the patient’s gait Quantity and Quality Assessment OptoGait acquires numerical parameters in real-time for gait, running and jump tests that can be viewed immediately. The easy to read report contains all data, and asymmetries between the two legs are highlighted instantly. OptoGait does not only detect the numerical data, but, via small cameras, which can be freely positioned, it allows the user to acquire images of carried out tests, synchronizing them perfectly with detected events. Without the need for any further synchronization between hardware and cameras, the numerous benefits of cross verification of data and images can be fully used. A more detailed video analysis can be had by further utilising the dedicated utility (angle, distance calculus, graphic tools, etc.). LM7184 OptoGait (5 Metre Kit) Email for quotation
OptoGait (5 Metre Kit) OptoGait is portable, quick, easy to use and very competitively priced compared to other Gait Analysis systems on the market today. OptoGait (in partnership with Podotech) is an innovative system for movement analysis and functional assessment of patients with normal or pathological conditions. This system comes with an extensive kit, that includes: 1 OptoGait TX with integrated interface (1cm) 1 OptoGait RX with integrated interface (1cm) 4 OptoGait TX (1cm) 4 OptoGait RX (1cm) 8 Connection plug for OptoGait 1 USB Cable A+B 1 Carrying Case for Optojump Next / OptoGait 5 meters 2 Power supply OptoGait up to 5m 2 EU plug for battery charger 2 Webcam for Optojump Next / OptoGait 2 Tripod 2 USB extension 1 Optogait Surface EMG cable 1 OptoGait Software The OptoGait modular system allows you to carry out: Gait Tests can consist of simple exercises (moving from A to B), but also of more complex ones, such as ‘roundtrip’ or walking backwards. They can be more complex, if needed, adding obstacles (e.g. plastic cones) or actions to be carried out between the various gait phases (sitting down and getting up before coming back, for example) or simultaneously. Dual task and obstructive task walking, can be easily measured here. Running Tests, just like gait tests, can be carried out either starting from a stand or running, to analyze the various phases, how the incremental weariness acts on the patient at each round installing the system on a track, measuring the time of a change of direction and the following acceleration, and so on... Thanks to the practical and innovative assembling system using caps, the modular system is assembled in a few minutes and does not require cables to connect the bars or further net adapters. The length goes from a minimum of 2 meters to a maximum of more than 100 meters. Larger installations of five meter or plus: allows the patient to walk or run through the machine on nearly any surface. Again, all parameters of gait are easily measured. Differentials, left and right, are noted. Speed and acceleration of each leg can be measured. Every motion in all directions can be analyzed for symmetry. The length of the system is flexible. The width of the system can be a maximum of six yards. This affords the clinician the ability to lay out various ‘obstacle courses’ to analyse their patient’s gait. Optogait allows users to: Assess objectively the patient’s general physical conditions Identify deficiencies, postural problems and asymmetries on the basis of data and videos and determine how the patients’ performance is being effected. Develop and apply therapeutic-rehabilitation applications, rehab approaches and orthopaedic solutions on the basis of precise data Prevent - thanks to immediate assessment of numerical values - of relapses, complications and involutions of the pathological or post-accident condition due to wrong evaluations or diagnosis Periodically verify the results and the efficacy of treatment Motivate patients giving them tangible proof of improvement Compare post- and pre-accident values if available Verify, in a dynamic situation, the efficacy of arch supports, insoles or functional tapes. Compare various shoes and their effect on the patient’s gait Quantity and Quality Assessment OptoGait acquires numerical parameters in real-time for gait, running and jump tests that can be viewed immediately. The easy to read report contains all data, and asymmetries between the two legs are highlighted instantly. OptoGait does not only detect the numerical data, but, via small cameras, which can be freely positioned, it allows the user to acquire images of carried out tests, synchronizing them perfectly with detected events. Without the need for any further synchronization between hardware and cameras, the numerous benefits of cross verification of data and images can be fully used. A more detailed video analysis can be had by further utilising the dedicated utility (angle, distance calculus, graphic tools, etc.). LM7184 OptoGait (5 Metre Kit) Email for quotation
OptoGait (5 Metre Kit) OptoGait is portable, quick, easy to use and very competitively priced compared to other Gait Analysis systems on the market today. OptoGait (in partnership with Podotech) is an innovative system for movement analysis and functional assessment of patients with normal or pathological conditions. This system comes with an extensive kit, that includes: 1 OptoGait TX with integrated interface (1cm) 1 OptoGait RX with integrated interface (1cm) 4 OptoGait TX (1cm) 4 OptoGait RX (1cm) 8 Connection plug for OptoGait 1 USB Cable A+B 1 Carrying Case for Optojump Next / OptoGait 5 meters 2 Power supply OptoGait up to 5m 2 EU plug for battery charger 2 Webcam for Optojump Next / OptoGait 2 Tripod 2 USB extension 1 Optogait Surface EMG cable 1 OptoGait Software The OptoGait modular system allows you to carry out: Gait Tests can consist of simple exercises (moving from A to B), but also of more complex ones, such as ‘roundtrip’ or walking backwards. They can be more complex, if needed, adding obstacles (e.g. plastic cones) or actions to be carried out between the various gait phases (sitting down and getting up before coming back, for example) or simultaneously. Dual task and obstructive task walking, can be easily measured here. Running Tests, just like gait tests, can be carried out either starting from a stand or running, to analyze the various phases, how the incremental weariness acts on the patient at each round installing the system on a track, measuring the time of a change of direction and the following acceleration, and so on... Thanks to the practical and innovative assembling system using caps, the modular system is assembled in a few minutes and does not require cables to connect the bars or further net adapters. The length goes from a minimum of 2 meters to a maximum of more than 100 meters. Larger installations of five meter or plus: allows the patient to walk or run through the machine on nearly any surface. Again, all parameters of gait are easily measured. Differentials, left and right, are noted. Speed and acceleration of each leg can be measured. Every motion in all directions can be analyzed for symmetry. The length of the system is flexible. The width of the system can be a maximum of six yards. This affords the clinician the ability to lay out various ‘obstacle courses’ to analyse their patient’s gait. Optogait allows users to: Assess objectively the patient’s general physical conditions Identify deficiencies, postural problems and asymmetries on the basis of data and videos and determine how the patients’ performance is being effected. Develop and apply therapeutic-rehabilitation applications, rehab approaches and orthopaedic solutions on the basis of precise data Prevent - thanks to immediate assessment of numerical values - of relapses, complications and involutions of the pathological or post-accident condition due to wrong evaluations or diagnosis Periodically verify the results and the efficacy of treatment Motivate patients giving them tangible proof of improvement Compare post- and pre-accident values if available Verify, in a dynamic situation, the efficacy of arch supports, insoles or functional tapes. Compare various shoes and their effect on the patient’s gait Quantity and Quality Assessment OptoGait acquires numerical parameters in real-time for gait, running and jump tests that can be viewed immediately. The easy to read report contains all data, and asymmetries between the two legs are highlighted instantly. OptoGait does not only detect the numerical data, but, via small cameras, which can be freely positioned, it allows the user to acquire images of carried out tests, synchronizing them perfectly with detected events. Without the need for any further synchronization between hardware and cameras, the numerous benefits of cross verification of data and images can be fully used. A more detailed video analysis can be had by further utilising the dedicated utility (angle, distance calculus, graphic tools, etc.). LM7184 OptoGait (5 Metre Kit) Email for quotation
OptoGait (5 Metre Kit) OptoGait is portable, quick, easy to use and very competitively priced compared to other Gait Analysis systems on the market today. OptoGait (in partnership with Podotech) is an innovative system for movement analysis and functional assessment of patients with normal or pathological conditions. This system comes with an extensive kit, that includes: 1 OptoGait TX with integrated interface (1cm) 1 OptoGait RX with integrated interface (1cm) 4 OptoGait TX (1cm) 4 OptoGait RX (1cm) 8 Connection plug for OptoGait 1 USB Cable A+B 1 Carrying Case for Optojump Next / OptoGait 5 meters 2 Power supply OptoGait up to 5m 2 EU plug for battery charger 2 Webcam for Optojump Next / OptoGait 2 Tripod 2 USB extension 1 Optogait Surface EMG cable 1 OptoGait Software The OptoGait modular system allows you to carry out: Gait Tests can consist of simple exercises (moving from A to B), but also of more complex ones, such as ‘roundtrip’ or walking backwards. They can be more complex, if needed, adding obstacles (e.g. plastic cones) or actions to be carried out between the various gait phases (sitting down and getting up before coming back, for example) or simultaneously. Dual task and obstructive task walking, can be easily measured here. Running Tests, just like gait tests, can be carried out either starting from a stand or running, to analyze the various phases, how the incremental weariness acts on the patient at each round installing the system on a track, measuring the time of a change of direction and the following acceleration, and so on... Thanks to the practical and innovative assembling system using caps, the modular system is assembled in a few minutes and does not require cables to connect the bars or further net adapters. The length goes from a minimum of 2 meters to a maximum of more than 100 meters. Larger installations of five meter or plus: allows the patient to walk or run through the machine on nearly any surface. Again, all parameters of gait are easily measured. Differentials, left and right, are noted. Speed and acceleration of each leg can be measured. Every motion in all directions can be analyzed for symmetry. The length of the system is flexible. The width of the system can be a maximum of six yards. This affords the clinician the ability to lay out various ‘obstacle courses’ to analyse their patient’s gait. Optogait allows users to: Assess objectively the patient’s general physical conditions Identify deficiencies, postural problems and asymmetries on the basis of data and videos and determine how the patients’ performance is being effected. Develop and apply therapeutic-rehabilitation applications, rehab approaches and orthopaedic solutions on the basis of precise data Prevent - thanks to immediate assessment of numerical values - of relapses, complications and involutions of the pathological or post-accident condition due to wrong evaluations or diagnosis Periodically verify the results and the efficacy of treatment Motivate patients giving them tangible proof of improvement Compare post- and pre-accident values if available Verify, in a dynamic situation, the efficacy of arch supports, insoles or functional tapes. Compare various shoes and their effect on the patient’s gait Quantity and Quality Assessment OptoGait acquires numerical parameters in real-time for gait, running and jump tests that can be viewed immediately. The easy to read report contains all data, and asymmetries between the two legs are highlighted instantly. OptoGait does not only detect the numerical data, but, via small cameras, which can be freely positioned, it allows the user to acquire images of carried out tests, synchronizing them perfectly with detected events. Without the need for any further synchronization between hardware and cameras, the numerous benefits of cross verification of data and images can be fully used. A more detailed video analysis can be had by further utilising the dedicated utility (angle, distance calculus, graphic tools, etc.). LM7184 OptoGait (5 Metre Kit) Email for quotation
OptoGait (5 Metre Kit) OptoGait is portable, quick, easy to use and very competitively priced compared to other Gait Analysis systems on the market today. OptoGait (in partnership with Podotech) is an innovative system for movement analysis and functional assessment of patients with normal or pathological conditions. This system comes with an extensive kit, that includes: 1 OptoGait TX with integrated interface (1cm) 1 OptoGait RX with integrated interface (1cm) 4 OptoGait TX (1cm) 4 OptoGait RX (1cm) 8 Connection plug for OptoGait 1 USB Cable A+B 1 Carrying Case for Optojump Next / OptoGait 5 meters 2 Power supply OptoGait up to 5m 2 EU plug for battery charger 2 Webcam for Optojump Next / OptoGait 2 Tripod 2 USB extension 1 Optogait Surface EMG cable 1 OptoGait Software The OptoGait modular system allows you to carry out: Gait Tests can consist of simple exercises (moving from A to B), but also of more complex ones, such as ‘roundtrip’ or walking backwards. They can be more complex, if needed, adding obstacles (e.g. plastic cones) or actions to be carried out between the various gait phases (sitting down and getting up before coming back, for example) or simultaneously. Dual task and obstructive task walking, can be easily measured here. Running Tests, just like gait tests, can be carried out either starting from a stand or running, to analyze the various phases, how the incremental weariness acts on the patient at each round installing the system on a track, measuring the time of a change of direction and the following acceleration, and so on... Thanks to the practical and innovative assembling system using caps, the modular system is assembled in a few minutes and does not require cables to connect the bars or further net adapters. The length goes from a minimum of 2 meters to a maximum of more than 100 meters. Larger installations of five meter or plus: allows the patient to walk or run through the machine on nearly any surface. Again, all parameters of gait are easily measured. Differentials, left and right, are noted. Speed and acceleration of each leg can be measured. Every motion in all directions can be analyzed for symmetry. The length of the system is flexible. The width of the system can be a maximum of six yards. This affords the clinician the ability to lay out various ‘obstacle courses’ to analyse their patient’s gait. Optogait allows users to: Assess objectively the patient’s general physical conditions Identify deficiencies, postural problems and asymmetries on the basis of data and videos and determine how the patients’ performance is being effected. Develop and apply therapeutic-rehabilitation applications, rehab approaches and orthopaedic solutions on the basis of precise data Prevent - thanks to immediate assessment of numerical values - of relapses, complications and involutions of the pathological or post-accident condition due to wrong evaluations or diagnosis Periodically verify the results and the efficacy of treatment Motivate patients giving them tangible proof of improvement Compare post- and pre-accident values if available Verify, in a dynamic situation, the efficacy of arch supports, insoles or functional tapes. Compare various shoes and their effect on the patient’s gait Quantity and Quality Assessment OptoGait acquires numerical parameters in real-time for gait, running and jump tests that can be viewed immediately. The easy to read report contains all data, and asymmetries between the two legs are highlighted instantly. OptoGait does not only detect the numerical data, but, via small cameras, which can be freely positioned, it allows the user to acquire images of carried out tests, synchronizing them perfectly with detected events. Without the need for any further synchronization between hardware and cameras, the numerous benefits of cross verification of data and images can be fully used. A more detailed video analysis can be had by further utilising the dedicated utility (angle, distance calculus, graphic tools, etc.). LM7184 OptoGait (5 Metre Kit) Email for quotation
OptoGait (5 Metre Kit) OptoGait is portable, quick, easy to use and very competitively priced compared to other Gait Analysis systems on the market today. OptoGait (in partnership with Podotech) is an innovative system for movement analysis and functional assessment of patients with normal or pathological conditions. This system comes with an extensive kit, that includes: 1 OptoGait TX with integrated interface (1cm) 1 OptoGait RX with integrated interface (1cm) 4 OptoGait TX (1cm) 4 OptoGait RX (1cm) 8 Connection plug for OptoGait 1 USB Cable A+B 1 Carrying Case for Optojump Next / OptoGait 5 meters 2 Power supply OptoGait up to 5m 2 EU plug for battery charger 2 Webcam for Optojump Next / OptoGait 2 Tripod 2 USB extension 1 Optogait Surface EMG cable 1 OptoGait Software The OptoGait modular system allows you to carry out: Gait Tests can consist of simple exercises (moving from A to B), but also of more complex ones, such as ‘roundtrip’ or walking backwards. They can be more complex, if needed, adding obstacles (e.g. plastic cones) or actions to be carried out between the various gait phases (sitting down and getting up before coming back, for example) or simultaneously. Dual task and obstructive task walking, can be easily measured here. Running Tests, just like gait tests, can be carried out either starting from a stand or running, to analyze the various phases, how the incremental weariness acts on the patient at each round installing the system on a track, measuring the time of a change of direction and the following acceleration, and so on... Thanks to the practical and innovative assembling system using caps, the modular system is assembled in a few minutes and does not require cables to connect the bars or further net adapters. The length goes from a minimum of 2 meters to a maximum of more than 100 meters. Larger installations of five meter or plus: allows the patient to walk or run through the machine on nearly any surface. Again, all parameters of gait are easily measured. Differentials, left and right, are noted. Speed and acceleration of each leg can be measured. Every motion in all directions can be analyzed for symmetry. The length of the system is flexible. The width of the system can be a maximum of six yards. This affords the clinician the ability to lay out various ‘obstacle courses’ to analyse their patient’s gait. Optogait allows users to: Assess objectively the patient’s general physical conditions Identify deficiencies, postural problems and asymmetries on the basis of data and videos and determine how the patients’ performance is being effected. Develop and apply therapeutic-rehabilitation applications, rehab approaches and orthopaedic solutions on the basis of precise data Prevent - thanks to immediate assessment of numerical values - of relapses, complications and involutions of the pathological or post-accident condition due to wrong evaluations or diagnosis Periodically verify the results and the efficacy of treatment Motivate patients giving them tangible proof of improvement Compare post- and pre-accident values if available Verify, in a dynamic situation, the efficacy of arch supports, insoles or functional tapes. Compare various shoes and their effect on the patient’s gait Quantity and Quality Assessment OptoGait acquires numerical parameters in real-time for gait, running and jump tests that can be viewed immediately. The easy to read report contains all data, and asymmetries between the two legs are highlighted instantly. OptoGait does not only detect the numerical data, but, via small cameras, which can be freely positioned, it allows the user to acquire images of carried out tests, synchronizing them perfectly with detected events. Without the need for any further synchronization between hardware and cameras, the numerous benefits of cross verification of data and images can be fully used. A more detailed video analysis can be had by further utilising the dedicated utility (angle, distance calculus, graphic tools, etc.). LM7184 OptoGait (5 Metre Kit) Email for quotation
相關產品
上海瑞獅生物科技有限公司 Shanghai RuiShi Biological Technology Co., Ltd
版權所有 Copyright(C)2013-2025 滬ICP備15014599號
欧美一级特黄大片在线观看 - 视频 - 在线观看 - 电影影院 - 品赏网